Pads
#520EG EdgeGuard Foam Pad, Black, Finishing, 5" / 130mm (2 pack)
Loop 5" / 130mm
Face Dia. 6"
Thickness 1"
#534EG EdgeGuard Foam Pad, Yellow, Polishing, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
#554EG EdgeGuard Foam Pad, Blue, Heavy Cut, 5" / 130mm (2 pack)
Loop Dia. 5"
Face Dia. 6"
Thickness 1"
#556EG EdgeGuard Foam Pad, Blueberry, Heavy Polishing, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
#572EG EdgeGuard Foam Pad, Maroon, Medium Cut, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
#592EG EdgeGuard Foam Pad, White, Polishing/Finishing, 5" / 130mm (2 pack)
Loop Dia. 5" / 130mm
Face Dia. 6"
Thickness 1"
1" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
1" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 1 inch Buff and Shine Uro-Fiber Pads with a 1 inch backing plate.
1" Uro-Tec™ Soft White Finishing Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
1" Uro-Tec™ Yellow Polishing Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
1" Uro-Tec™Maroon Medium Cut/Heavy Polishing Foam Pad
- Loop diameter: 1.375"
- Foam thickness: .750"
2" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 2.125"
- Foam thickness: .750"
2" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 2 inch Buff and Shine Uro-Fiber Pad with a 2 inch backing plate.
2" Uro-Tec™ Soft White Finishing Foam Grip Pad™
- Loop diameter: 2.125"
- Foam thickness: .750"
2" Uro-Tec™ Yellow Polishing Foam Pad
- Loop diameter: 2.125"
- Foam thickness: .750"
2" Uro-Tec™Maroon Medium Cut/Heavy Polishing Foam Pad
- Loop diameter: 2.125"
- Foam thickness: .750"
3" Uro-Tec™ Coarse Blue Heavy Cutting Foam Pad
- Loop diameter: 3"
- Foam thickness: .750"
3" Black Curved Back Foam Grip Pad™
Our 3" Curved Back Foam Pads have quality hook & loop material for fast easy pad loading with a domed face for improved buffing along with reinforced plastic backing. These pads are suitable for small buffing areas and are engineered for smooth performance.
- Diameter: 3"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Black
- Application: Finishing
- Foam PPI: 80
- Thickness: 1"
- Suggested RPM: 1200 - 1750
3" Buffing Starter Kit (6 piece)
TRI PACK BUFF KIT No. TP-3 includes three pads a backing plate and two adapters. The three pads are #301G for heavy compounding, #330G for polishing and #320G for finishing along with our grip backing plate #358. The two adapters are #DA5816 and #SP5814. The #DA5816 mounts in the grip backing plate #358 making a grip backing plate for a pneumatic machine. The #SP5814 also mounts in the grip backing plate #358 making a grip backing plate for drill mount. The MINI TRI PAC BUFF KIT was designed for small buffing areas.
301G
- Diameter: 3"
- Pile Height: 1/2"
- Material Type: 100% 4Ply Twisted Wool
- Mounting Type: Grip Pad
- Application: Compounding
- Suggested RPM: 1750 - 2200
330G
- Diameter: 3"
- Material Type: Reticulated Polyester Foam
- Mounting Type: Grip Pad
- Application: Polishing
- Suggested RPM: 1120 - 1750
- Thickness: 1"
320G
- Diameter: 3"
- Material Type: Reticulated Polyester Foam
- Mounting Type: Grip Pad
- Application: Finishing
- Suggested RPM: 1200 - 1500
- Thickness: 1"
358
- Diameter: 3"
- Mounting Type: Grip Pad
- Thickness: 1/4"
- Thread: 5/8 x 11"
- Max RPM: 3000
DA5816
- Thread of Side 1: 5/16" x 24"
- Thread of Side 2: 5/8" x 11"
SP5814
- Thread of Side 1: Drill Chuck
- Thread of Side 2: 5/8" x 11"
3" Buffing Starter Kit (7 piece)
TRI PACK BUFF KIT No. TP-4 includes four pads a backing plate and two adapters. The four pads are #301G for heavy compounding, #301GY for medium compounding, #330G for polishing and #320G for finishing along with our grip backing plate #358. The two adapters are #DA5816 and #SP5814. The #DA5816 mounts in the grip backing plate #358 making a grip backing plate for a pneumatic polisher. The #SP5814 also mounts in the grip backing plate #358 making a grip backing plate for drill mount. The MINI TRI PAC BUFF KIT was designed for small buffing areas.
301G
- Diameter: 3"
- Pile Height: 1/2"
- Material Type: 100% 4Ply Twisted Wool
- Mounting Type: Grip Pad
- Application: Compounding
- Suggested RPM: 1750 - 2200
301GY
- Diameter: 3"
- Pile Height: 1/2"
- Material Type: Wool Blend 4Ply Twist
- Mounting Type: Grip Pad
- Application: Lt. Cut/Polishing
- Suggested RPM: 1400 - 1600
330G
- Diameter: 3"
- Material Type: Reticulated Polyester Foam
- Mounting Type: Grip Pad
- Application: Polishing
- Suggested RPM: 1120 - 1750
- Thickness: 1"
320G
- Diameter: 3"
- Material Type: Reticulated Polyester Foam
- Mounting Type: Grip Pad
- Application: Finishing
- Suggested RPM: 1200 - 1500
- Thickness: 1"
358
- Diameter: 3"
- Mounting Type: Grip Pad
- Thickness: 1/4"
- Thread: 5/8 x 11"
- Max RPM: 3000
DA5816
- Thread of Side 1: 5/16" x 24"
- Thread of Side 2: 5/8" x 11"
SP5814
- Thread of Side 1: Drill Chuck
- Thread of Side 2: 5/8" x 11"
3" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
3" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
3 inch Buff and Shine Uro-Fiber Pad can be used with a 2 or 3 inch backing plate.
3" Uro-Tec™ Soft White Finishing Foam Grip Pad™
- Loop diameter: 3"
- Foam thickness: .750"
3" Uro-Tec™ Yellow Polishing Foam Pad
- Loop diameter: 3"
- Foam thickness: .750"
3" Uro-Tec™Maroon Medium Cut/Heavy Polishing Foam Pad
- Loop diameter: 3"
- Foam thickness: .750"
3" White Wool Grip Pad™
Our 3" Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
- Diameter: 3"
- Pile Height: 1/2"
- Mounting: Grip Pad
- Material Type: 100% Wool 4Ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
3" Yellow Curved Back Foam Grip Pad™
Our 3" Curved Back Foam Pads have quality hook & loop material for fast easy pad loading with a domed face for improved buffing along with reinforced plastic backing. These pads are suitable for small buffing areas and are engineered for smooth performance.
- Diameter: 3"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Yellow
- Application: Lt. Compounding/Polishing
- Foam PPI: 50
- Thickness: 1"
- Suggested RPM: 1200 - 1750
3" Yellow Wool Blend Grip Pad™
Our 3" Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
- Diameter: 3"
- Pile Height: 1/2"
- Mounting: Grip Pad
- Material Type: Wool Blend 4Ply Twist
- Material Color: Yellow
- Application: Light Cut/Polishing
- Suggested RPM: 1750 - 2400
4" Black & Black Micro Fiber Finishing Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 4"
- Loop Dia: 3.5"
- Application: Polishing & Finishing
4" Black & Orange Micro Fiber Cutting Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 4"
- Loop Dia: 3.5"
- Application: Cutting
4" Black Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Black
- Application: Finishing
- Foam PPI: 80
- Thickness: 1"
4" Blue Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Blue
- Application: Lt. Polishing
- Foam PPI: 70
- Thickness: 1"
4" Green Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: Green
- Application: Polishing
- Foam PPI: 60
- Thickness: 1"
4" Orange Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Un-Reticulated Polyester Foam
- Material Color: Orange
- Application: Med. Cutting
- Foam PPI: N/A
- Thickness: 1"
4" White Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Reticulated Polyester Foam
- Material Color: White
- Application: Ultra Finishing
- Foam PPI: 90
- Thickness: 1"
4" Yellow Foam Grip Pad™ for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4" foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM - We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP - Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE - A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
- Diameter: 4"
- Mounting: Grip Pad
- Material Type: Un-Reticulated Polyester Foam
- Material Color: Yellow
- Application: Cutting
- Foam PPI: N/A
- Thickness: 1"
5" 100% Natural Wool 4 Ply Twist Grip Pad™
Our Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
- Diameter: 5"
- Pile Height: 1.25"
- Mounting: Grip Pad
- Material Type: 100% Wool 4ply Twist
- Material Color: Natural
- Application: Compounding
- Suggested RPM: 1750 - 2400
5" Uro-Fiber™ Finisher Pad
- Made in the USA
- Patent Pending dual fiber stitch
- Strongest interface foam on the market
- Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
- Not recommended for a High-Speed/Rotary polisher
- Clean with soft nylon brush or compressed air per buffing cycle
- Able to cut, polish and finish on soft paints
- Washable
- Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
5" Uro-Fiber™ Pad
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 5 inch Buff and Shine Uro-Fiber Pads with a 5 inch backing plate
5.5" Black & Black Micro Fiber Finishing Grip Pad™
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 5.5"
- Loop Dia: 5"
- Application: Polishing & Finishing
5.5" Black & Orange Micro Fiber Cutting Grip Pad™
Buff and Shine Microfiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
- Face Dia: 5.5"
- Loop Dia: 5"
- Application: Cutting
5.5" Flat Faced D.A. Euro Orange Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Orange
- Application: Med Cut
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. Euro Red Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Red
- Application: Ultra Finish/Application Pad
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. Euro White Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: White
- Application: Heavy Polishing
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. Euro Yellow Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Yellow
- Application: Heavy Cutting
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. US Black Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Black
- Application: Finishing
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. US Blue Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Blue
- Application: Lt. Polishing
- Material Type: Euro Prepolymer Foam
5.5" Flat Faced D.A. US Green Foam Grip Pad™
Buff and Shine Mfg. is now manufacturing a full line of 5.5" foam pads that fit the all DA polishers with a 5" backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
- Diameter: 5.5"
- Thickness: 1"
- Mounting: Grip Pad
- Foam Color: Green
- Application: Polishing
- Material Type: Euro Prepolymer Foam